iPECS LIP-8012D - 6.2 Getting Voice Mail Messages

LIP-8012D & LIP-8024D User Guide
52
NOTE—The mobile extension may reconnect to the
transfer call by pressing the mobile flash digit(*).
In iPECS-MG
To register a mobile phone number:
 Press the TRANS/PGM button,
 Dial 51,
 Select Mobile Index 1 or 2,
 1 to activate, 0 to deactivate,
 Press the HOLD/SAVE button.
To activate a registered mobile phone from the user’s
station:
 Press the TRANS/PGM button,
 Dial 52,
 Select Mobile Index 1 or 2,
 Dial the mobile phone number with CO Access code,
 Press the HOLD/SAVE button.
To place a call from the mobile extension using the iPECS
System:
 Dial the ISDN DID number of the station; the system
will check the Caller ID and answer the call. The user
then will receive intercom dial tone,
 Place internal or external iPECS call as normal.
To Transfer a call from the mobile extension using the
iPECS:
 Dial the mobile flash digit “*” while on an iPECS call,
 Dial the desired extension, the call is transferred and
the mobile phone returns to idle.