Need help?Do you have a question about the iProSecu iDC-453 and is the answer not in the manual?
Guides on adjusting display properties like color quality and screen resolution.
Covers connecting the camera and adjusting its 3-axis gimbal.
Guides on assigning IP addresses using the IP Installer software.
Explains the requirement to install ActiveX for initial camera video viewing via IE.
Explains the Real-Time Display panel for live video streaming.
Describes how to take snapshots of events in JPEG format.
Details how to record video continuously in AVI files.
Explains how to zoom in on specific areas of interest in the video.
Guides on playing back recorded events stored on the SD card.
Covers configuration of user accounts, system, network, video, and audio settings.
Describes the status bar showing system time, resolution, and frame rate.
Explains enabling secondary viewing for mobile or PDA devices.
Details enabling full-duplex voice communication for surveillance.
Covers full-screen mode and pop-up menu options like Snapshot and Record Start.
Instructions on accessing the administration page via an icon.
Covers general system settings like information, OSD, and time.
Managing users (administrator, general, anonymous) and their permissions.
Updating firmware, rebooting the system, and factory default settings.
Exporting and importing system settings.
Configuring IP settings using DHCP or static IP.
Details on how IP camera obtains network parameters automatically via DHCP.
Instructions for manually entering IP address, subnet mask, gateway, and DNS.
Assigning ports for Web Page, RTSP, RTP for network communication.
Enabling UPnP for automatic detection and access via "My Network Places".
Setting up PPPoE for ADSL connections, including username and password.
Setting up Dynamic DNS service for remote access.
Adjusting brightness, contrast, sharpness, and setting up privacy masks.
Selecting streaming output (Streaming 1 & 2) with basic/advanced modes.
Choosing input resolution, video system, and TV output.
Configuring basic settings for Streaming 1, including resolution, quality, and frame rate.
Configuring advanced settings for Streaming 1, including bitrate control and GOP size.
Configuring basic settings for Streaming 2, including resolution and quality.
Configuring advanced settings for Streaming 2, including bitrate and GOP size.
Setting up 3GPP streaming with specific resolution, FPS, and format.
Enabling and configuring 2-way audio communication between camera and PC.
Setting up video motion detection with multiple areas and sensitivity.
Configuring motion detection areas and actions like email, FTP, relay, SD card save.
Setting different recording file types (AVI, JPEG) and modes for triggered events.
Configuring pre-alarm and post-alarm times for triggered events.
Saving video to SD card when network connection is lost.
Recording video to SD card based on IP check to ensure continuous recording.
Setting up schedules for recording and snapshots.
Configuring input/output actions for triggered events like email, FTP, relay.
Setting up connected devices to send signals to relay output upon triggering.
Configuring output devices to perform related actions based on settings.
Defines ALARM INPUT and RELAY OUTPUT pins and their specifications.
Examples of triggering alarm siren and indoor illumination with relays.
Configuring SMTP server details for sending emails.
Configuring FTP server details for file transfer.
Accessing and sorting system, motion detection, and I/O logs.
Accessing and playing back video files recorded on the SD card.
Managing SD card, including auto deletion and formatting.
Network setup for ADSL/Cable modem with real IP or PPPoE.
Network setup with a switch hub for multiple devices.
Network setup using IP sharing and virtual IP with port forwarding.
Steps to reset the camera to factory default IP and password.
Instructions for performing a factory reset by holding a button.
Lists the main component of the package.
Lists the included power adaptor.
Lists the included Ethernet cable.
Lists the contents of the CD, including manual and utility.
Lists recommended SD card brands and capacities.
To Next Page
General