User’s Guide
(8) Click ”Start” ->“Run”.
(9) Input ”cmd” ,then click “OK”.
(10) Input “ipconfig” in Pop-up Command window.
(11) Please make sure your IP is the same with below. If same then your
configurations is successful, or please redo the above steps and restart your
computer.
The IP address is between 192.168.0.2 and 192.168.0.254
The subnet mask is 255.255.255.0
The default gateway is 192.168.0.1
-27- www.zioncom.net
To Next Page
Loading...
