User’s Guide
Protocol
Chose TCP/UDP type for the packet that you want to diversity a Internet traffic.
Destination Port
For destination port, enter the destination protocol port number that you want to
diversity a Internet traffic.
Designated WAN
Chose WAN port to diversity a Internet traffic.
Attention:
Please click “save”, when you want to keep the configuration in case power off or
reset on the router.
It is better to let IP address binding on or use the static IP address on the client for
user self-defined LS.
6.9.2 APPLICATIONS
Click LS/NAT—Application, refer to following sketch-up:
-74- www.zioncom.net
To Next Page
Loading...
