User’s Guide
6.2 SETUP FOR PPPoE IP
This connection way is suitable for virtual dial-up Internet connection.
(1) Open external ADSL Modem and check the WAN LED of BROADBAND
ROUTER.
* If WAN LED is off, check the network cable between external modem and
WAN port.
(2) Click “Basic setup “-> “WAN setup”, as follows:
(3) Select “PPPoE User (ADSL)” radio button.
(4) Key in the “User ID” and “Password” provided by your Internet service
provider.
(5) Click the “Apply” button.
(6) You may see the popup window.
-39- www.zioncom.net
To Next Page
Loading...
