User’s Guide
Define the IP address of host on LAN side.
Internal Port Range
Define the port number on LAN side.
If not defined, the external port number will be used.
Note:
1.Pleaseclick “save”, when you want to keep the configuration in case power off
or reset on the router .
2.It is better to let IP address binding on or use the static IP address on the client
for user self-defined LS.
6.10 ADVANCED SETUP
6.10.1 FIREWALL
Click Advanced –firewall, refer to following snap
-80- www.zioncom.net
To Next Page
Loading...
