User’s Guide
Note:
After completed setup , please save Broadband Router configuration, otherwise the
configuration will be lost when Broadband Router is power off or restarts.
-48- www.zioncom.net
Other configuration:
Physical address Clone：If you want to change WAN port MAC address you
can choose this option; If this option is un-chosen the WAN MAC address is
default value; By this option the displayed MAC address is your current MAC
address; You can also manually add the WAN port MAC address; without the
option WAN port MAC address will restore to default value.
Allow private IP to be accepted: Allow WAN port assigned private IP addess
To Next Page
Loading...
