Iridium 9523 - CPBF - Find Phonebook Entries; CPBR - Read Phonebook Entries; CPBS - Select Phonebook Storage

Iridium Communications, Inc. Information Contained in this Guide
Iridium 9523 Product Developers’ Guide is Subject to Change Without Notice
Revision 2.6
Iridium Communications, Inc. Distribution of Guide Restricted
Proprietary & Confidential Information Page 51 of 115 to Product Developers
Only
+COPS: [list of supported (<stat>,long alphanumeric <oper>,short alphanumeric <oper>,numeric
<oper>)s] [,,(list of supported <mode>s),(list of supported <format>s)]
where <stat> indicates:
2 current
For example:
+COPS:(002),"IRIDIUM","IRIDIUM","90103",,(000-001),(000-002)
5.7.44 +CPBF - Find Phonebook Entries
Exec Command: +CPBF=<findtext>
Execution command returns phonebook entries (from the current phonebook memory storage selected
with +CPBS) which alphanumeric fields start with string <findtext>. <findtext> should be of string type
enclosed by ““; for example, “John”.
Entry fields returned are location number <index n>, phone number stored there <number> (of address
type <type>), and text <text> associated with the number. Response is in the following format:
+CPBF: <index1>,<number>,<type>,<text>[[...]<CR><LF>+CBPF:
<index2>,<number>,<type>,<text>]
Test Command: +CPBF=?
Test command returns the maximum lengths of <number> and <text> fields for phonebook entries.
Response is in the form:
+CPBF: <nlength>,<tlength>
where <nlength> indicates the maximum length of <number> and <tlength> shows the maximum length
of <text>.
5.7.45 +CPBR - Read Phonebook Entries
Exec Command: +CPBR=<index1>[,<index2>]
Execution command returns phonebook entries in location number range <index1>... <index2> from the
current phonebook memory storage selected with +CPBS. If <index2> is left out, only location <index1>
is returned.
Entry fields returned are location number <index n>, phone number stored there <number> (of address
type <type>) and text <text> associated with the number. Response is in the form:
+CPBR: <index1>,<number>,<type>,<text>[[...] <CR><LF>+CPBR:
<index2>,<number>,<type>,<text>]
Test Command: +CPBR=?
Test command returns location range supported by the current storage and the maximum lengths of
<number> and <text> fields. Response is in the form:
+CPBR: (list of supported <index>s),<nlength>,<tlength>
where <nlength> indicates the maximum length of <number> and <tlength> shows the maximum length
of <text>.
5.7.46 +CPBS - Select Phonebook Storage
Set Command: +CPBS=<storage>