Iridium 9523 - WDLDM - IRLP Dynamic Link Delay Measurement; WDAV - Register or Deregister an RS232 DAV Data Peripheral; SBDWB - Short Burst Data: Write Binary Data to the Iridium 9523

Iridium Communications, Inc. Information Contained in this Guide
Iridium 9523 Product Developers’ Guide is Subject to Change Without Notice
Revision 2.6
Iridium Communications, Inc. Distribution of Guide Restricted
Proprietary & Confidential Information Page 67 of 115 to Product Developers
Only
5.7.83 +WDLDM - IRLP Dynamic Link Delay Measurement
Set Command: +WDLDM=[<dldm>[,<mi>[,<dtl>]]]
Set the DCE dynamic link delay measurement parameters.
<dldm> can take the following values:
0 measurement off (default)
1 measurement on
<mi> denotes the measurement interval and can take the following values:
1-255 (in 1000-ms unit). Default is 15 for 15000 ms.
<dtl> denotes the delay tolerance in the link delay difference and can take the following values:
1-100 (in 1% unit). Default is 10%.
Read Command: +WDLDM?
Query the current parameter settings. The response is in the form:
+WDLDM: <dldm>,<mi>,<dtl>
Test Command: +WDLDM=?
List the supported parameter settings. The response is in the form:
+WDLDM: (supported <dldm>s), (supported <mi>s), (supported <dtl>s)
5.7.84 +WDAV - Register or Deregister an RS232 DAV Data Peripheral
Set Command: +WDAV=[<DP type>[,<encrypt>]]
Register or deregister an RS232 DAV Data Peripheral (DP).
<DP type> can take on the following values:
0 Deregister peripheral
1 Register Type 1 RS232 DAV Data Peripheral
<encrypt> can take on the following values:
0 Encryption is not supported at this time
Read Command: +WDAV?
Query the current DP registration parameter settings. The response is in the form:
+WDAV:<DP type>,<encrypt>
Test Command: +WDAV=?
List the supported DP registration parameters. The response is in the form:
+WDAV:(supported <type>s),(supported <encrypt>s)
5.7.85 +SBDWB - Short Burst Data: Write Binary Data to the Iridium 9523
Exec Command: +SBDWB=[<SBD message length>]
This command is used to transfer a binary SBD message from the FA to the single mobile originated
buffer in the Iridium 9523. The mobile originated buffer can contain only one message at any one time.