Iridium Communications, Inc. Information Contained in this Guide
Iridium 9523 Product Developers’ Guide is Subject to Change Without Notice
Revision 2.6
Iridium Communications, Inc. Distribution of Guide Restricted
Proprietary & Confidential Information Page 64 of 115 to Product Developers
Only
1 active
For example:
+CCFC:0,1
+CCFC:1,1,”+441223420024”,145
+CCFC:2,3,”00881662990000”,,1,,,”30”
Test Command: +CCFC=?
List supported <reason>s. The response is in the form of a range rather than a list:
+CCFC:(000-005)
5.7.77 +CLCC - Request Current Call Status
Exec Command: +CLCC
Returns the current call status of the Iridium 9523. The response is a comma separated list of call states.
The number of call states in the response depends on the number of active call instances e.g. incoming
calls and held calls.
+CLCC: <stat>[,<stat>[,<stat>]]
where <stat> (State of the Iridium 9523):
000 Active
001 Call Held
002 Dialing (MO Call)
004 Incoming (MT Call)
006 Idle
Note: the form of this announcement currently differs from the standard given in 3GPP TS 27.007 [12]
subclause 7.18. A change to the interface may be made to become more standard.
5.7.78 +CNUM - Read MSISDN Numbers
Exec Command: +CNUM
Get the MSISDN numbers of the SIM. If returning fails, ERROR is returned. Response is in the form:
+CNUM:<text>,<number>,<type>
<text>: alpha tag of the phone numbers
<number>: MSISDN numbers
<type>: if the number starts with a ‘+’, then the type is 145; otherwise the type is 129
Note: MSISDN numbers are only available if they were intentionally stored on the SIM.
5.7.79 +CSSSC – Supplementary Services Short Code
Exec Command: +CSSSC=”<shortcode>”
Execute the given shortcode. If the shortcode fails, a CME ERROR code is returned. Otherwise, OK is
returned.
Note: Shortcode functionality is only available if provisioned.
To Next Page
Loading...
