Iridium 9523 - Page 98

Iridium Communications, Inc. Information Contained in this Guide
Iridium 9523 Product Developers’ Guide is Subject to Change Without Notice
Revision 2.6
Iridium Communications, Inc. Distribution of Guide Restricted
Proprietary & Confidential Information Page 98 of 115 to Product Developers
Only
Register
Number
Range Default Description
Sr=n Command
Write Protected
in SAC0201
S3 0-127 13 Carriage return character
S4 0-127 10 Line feed character
S5 0-32 8 Backspace character
S6 0-255 4 Wait for dial-tone
No action, compatibility only
S7 0-255 50 Communication standard used by Iridium 9523
No action, compatibility only
S8 0-255 4 Pause time for comma
No action, compatibility only
S9 0-255 6 Carrier detect response time
No action, compatibility only
S10 0-255 14 Carrier loss time
No action, compatibility only
S11 0-255 0 DTMF tone duration
No action, compatibility only
Yes
S12 0-255 40 Escape guard time. Time, in 50ths of a second, until
OK displayed after entering command mode by escape
sequence.
S14 0-255 170 Bitmap register where bit 1 reflects the En setting, bit 2
turns off command responses, bit 3 reflects the Vn
setting, bit 5 reflects pulse/tone dial mode
S21 0-255 48 Bitmap register where bit 0 reflects telephone jack
control, bit 2 reflects RTS/CTS on/off, bits 3 and 4
reflect the &Dn setting, bit 5 reflects the &Cn setting,
bit 6 reflects DSR on/off, and bit 7 reflects
disconnecting long space.
Yes
S22 0-255 246 Bitmap register where bits 0 and 1 reflect the speaker
volume setting, bits 2 and 3 reflect the speaker on/off
setting, and bits 4, 5 and 6 reflect the Xn setting.
Yes