irinox EasyFresh - Maintenance; Assistance; Routine Maintenance; Sanigen Maintenance

28
Routine maintenance:
EVERY 6 MONTHS: Cleaning
0
Cut power from the conserver and
access Sanigen
1
Unhook the outside lug, holding the
glass cylinder still
2
Pull off the external cap from the glass cylinder,
being careful not to break the glass
4
Wash the external cap in lukewarm water,
being careful not to deform it.
Carefully remove any dust deposit
7
Check to see if the glass cylinder has any cracks.
If so, the glass cylinder must be replaced
5
Clean the glass cylinder with a moist cloth.
Carefully remove any dust deposit
6
Re-screw the glass cylinder clockwise,
again acting on the red plastic base
8
Insert the external cap, being sure to place it over
of the internal cap. Maintain a distance of about
5mm from the red base
9
Holding the glass cylinder still, re-insert the
external lug, making sure that it is contact
with the external cap
3
Unscrew the glass cylinder anti-clockwise,
acting on the red plastic base