14. RECORDING MODE
Normal Recording
Event Recording
Parking Recording
Motion Detection
Recording Mode
- Once the power is connected, the device will boot up and start recording.
- Security LED flickers once every 1 seconds.
- Once the device detects any shock (REC LED light will flickers),
it will be recorded under Event recording mode.
- It will switch back to Normal recording mode after the Event recording time is finished.
- Once the device detects any movement within 3 meters range, it will start to record
- Security LED light will start to blink faster.
- Once there is no movement, it will switch back to parking recording mode.
- Once the engine is turned off (ACC line), the device will automatically enter parking mode after 5 seconds.
- Parking record with 10 frames per second in order to capture more recordings.
- Security LED light flickers every 2 second.
- Switch to Normal recording mode when the user starts to drive.
Menu and function can be changed without prior notice by sudden firmware upgrade or product enhancement.
To Next Page
Loading...
