ITC DOSTEC AC - Flow Fault Alarm

28
LEVEL 1 PRE EMPTY
Alarm ON
Level relay
Stop pump
OFF
OFF
LEVEL 2 EMPTY
Alarm ON
Level 2 relay
Stop pump
OFF
OFF
LEVEL 1 PRE EMPTY
Alarm ON
Level relay
Stop pump
OFF
OFF
LEVEL 2 EMPTY
Alarm ON
Level 2 relay ON
Stop pump OFF
ENT
ENT
%
l / h
0 0 0
000
MODE
0240
x3 x2
MENU ALARM
LEVEL 2
FLOW
LEAKAGE
PRESSURE
LEVEL 1
FLOW FAILURE
Alarm
Relay out OFF
Stop pump
OFF
OFF
LEVEL 1 PRE EMPTY
Alarm ON
Level relay
Stop pump
OFF
OFF
FLOW FAILURE
OFF
Alarm ON
Relay out
Stop pump
OFF
LEVEL 1 PRE EMPTY
Alarm ON
Level relay
Stop pump
OFF
OFF
FLOW FAILURE
Alarm ON
Relay out ON
Stop pump OFF
x3
ENT
ENT
%
l / h
0 0 0
000
MODE
0240
LEVEL 2 EMPTY
Alarm
Level 2 relay OFF
Stop pump
OFF
OFF
MENU ALARM
LEVEL 2
FLOW
LEAKAGE
PRESSURE
LEVEL 1
Conguration
4.3.3 Flow fault alarm
Dosing ow detector alarm.
See section 4.2.4.2 (Conguration/Inputs/Flow Detector)
Activate or deactivate the Alarm Relay output, when the unit is in
alarm, by pressing
and conrm by pressing
ENT
Activate or deactivate the Alarm Relay output, when the unit is in
alarm, by pressing and conrm by pressing
ENT
Activate or deactivate, stop the pump when the alarm goes off, by
pressing and conrm by pressing
ENT
Activate or deactivate, stop the pump when the alarm goes off, by
pressing and conrm by pressing
ENT
Activate or deactivate the alarm by pressing and conrm
by pressing
ENT
4.3.2 Level alarm 2
Low level alarm according to Level 2 input. Automatic reset
Activate or deactivate the alarm by pressing
and conrm
by pressing
ENT