ITC DOSTEC AC - Configuration

21
x2
ENT ENT
%
l / h
0 0 0
0 0 0
MODE
0240
CONFIGURATION
SET UP
IN / OUT
PUMP CALIBRATION
DOSING MODE
SET UP
UNITS
FLOWMETER
LOCK CODE
MODBUS
DOSING PUMP
ENT
DOSING PUMP
RealFlow
Max.Flow
Regulat.
Limit
Press
0240
l/h
l/h
%
%
Bar
0240
100
100
5.5
DOSING PUMP
RealFlow
Max.Flow
Regulat.
Limit
Press
0240
l/h
l/h
%
%
Bar
0240
100
100
5.5
DOSING PUMP
RealFlow
Max.Flow
Regulat.
Limit
Press
100
l/h
%
l/h
%
Bar
0240
0240
100
5.5
DOSING PUMP
RealFlow
Max.Flow
Regulat.
Limit
Press
100
l/h
%
l/h
%
Bar
0240
0240
100
5.5
Conguration
4.2.3 Conguration
4.2.3.1 Dosing pump
Technical characteristics of the pump
Pump ow rate
Real Flow is the ow due to the calibration test, if carried out, and/or the ow due to the regulation.
Max. Flow is the resulting ow according to the limit and/or selected dosing prole.
Regulation
In case of stroke length regulation system available in this unit, and the regulator knob in a position
different from 100%, this parameter must coincide with the regulation of the pump’s knob.
Change by pressing
and conrm by pressing
ENT
Change by pressing and conrm by pressing
ENT
Change by pressing and conrm by pressing
ENT
Limited ow %
This is the maximum limited ow of the pump. It limits the pump ow so that it does not exceed the
entered value under any circumstances.
Maximum pressure
Dosing pump maximum working pressure