ITC DOSTEC AC - Hydraulic Installation; Installation Examples

36
7
12
h
1
2
5
6
3
4
h
8
9
10
11
1
2
5
6
7
12
Installation
5.4. HYDRAULIC INSTALLATION
5.4.1. Installation examples
1. To avoid undissolved particles, never suck the product to be injected from the bottom of the tank.
2. Filter. It is essential to install a lter (150 micron) in the suction piping.
3. Level sensor
4. Agitator
5. Make sure to collect any liquid leakage from the cylinder’s vent/drain orice in a proper container.
6. Priming/drain valve.
7. Pressure relief valve. Install a pressure relief valve in a bypass as close as possible to the pump
in order to protect the pump and the installation from possible overpressure. This bypass should pipe
the liquid to a safe place.
8. Pulse dampener
9. Pressure gauge.
10. Pressure maintenance valve.
11. Flowmeter
12. Injection check valve