ITC DOSTEC AC - Diaphragm Leakage Alarm; Overpressure Alarm

29
ENT
ENT
%
l / h
0 0 0
000
MODE
0240
x3
x3
DIAPHRAGM LEAKAGE
Alarm
Relay out OFF
Stop pump
OFF
OFF
MENU ALARM
LEVEL 2
FLOW
LEAKAGE
PRESSURE
LEVEL 1
LEVEL 1 PRE EMPTY
Alarm ON
Level relay
Stop pump
OFF
OFF
DIAPHRAGM LEAKAGE
OFF
Alarm ON
Relay out
Stop pump
OFF
DIAPHRAGM LEAKAGE
Alarm ON
Relay out ON
Stop pump OFF
ENT
ENT
x3
x4
MENU ALARM
LEVEL 2
FLOW
LEAKAGE
PRESSURE
LEVEL 1
%
l / h
0 0 0
000
MODE
0240
OVER PRESSURE
Alarm
Relay out OFF
Stop pump
OFF
OFF
LEVEL 1 PRE EMPTY
Alarm ON
Level relay
Stop pump
OFF
OFF
OVER PRESSURE
OFF
Alarm ON
Relay out
Stop pump
OFF
LEVEL 1 PRE EMPTY
Alarm ON
Level relay
Stop pump
OFF
OFF
OVER PRESSURE
Alarm ON
Relay out ON
Stop pump OFF
Conguration
4.3.5 Overpressure alarm
Overpressure detection alarm. Automatic reset.
4.3.4 Diaphragm leakage alarm
Diaphragm leakage detection alarm for electrically conductive liquids (min. 0.05 ms).
Activate or deactivate the Alarm Relay output, when the unit is in
alarm, by pressing
and conrm by pressing
ENT
Activate or deactivate the Alarm Relay output, when the unit is in
alarm, by pressing and conrm by pressing
ENT
Activate or deactivate, stop the pump when the alarm goes off, by
pressing and conrm by pressing
ENT
Activate or deactivate, stop the pump when the alarm goes off, by
pressing and conrm by pressing
ENT
Activate or deactivate the alarm by pressing and conrm
by pressing
ENT
Activate or deactivate the alarm by pressing and conrm
by pressing
ENT