33
Min.
Max.
Installation
5.2. BLOCK
Pull out the oil cap for transport, ll the pump with the SAE 80W90 oil supplied (or similar), up to the level
shown by the sight glass and t the working cap (black with an orice).
Approximate oil capacity:
650 cm³(AC3)
250 cm³ (AC1/2)
List of lubricants:
CEPSA SAE80W90
REPSOL EP 80W/90
SHELL SPIRLAXHD OIL 80W/90
ESSO GEAR OIL 80W/90
AGIP ROTRA MP 80W-90
MOBILUDE HD 80W-90
BP ENERGEAR HT 80W-90
CATROL HYPOYC
GULF GEAR MP SAE 80W 90
ELF TRANSGEAR HD 80W-90
5.3. WIRING
The electrical protection of the motor must be installed and adjusted on the basis of its
nominal current (thermomagnetic circuit breaker). (See connection).
A device for disconnection in case of emergency must be installed.
The equipment must be protected against false starts.
To Next Page
Loading...