ITC DOSTEC AC - Page 43

43
71184 Eccentric shaft 15 encoder AC3 1
71185.1 Block lid D50 encoder 1
71186 Magnet for encoder base D50 1
71187 Eccentric shaft 10 encoder AC3 1
71188 Eccentric shaft 7.5 encoder AC3 1
71189 Eccentric shaft 5 encoder AC3 1
71303 Key DIN 6885-a (8 x 7 x 25) 1
71304 M6 x 10 DIN 913 8.8 screw 1
71306 O-ring 70 x 2.5 NBR 1
71307 O-ring 125 x 2.5 NBR 1
71308 O-ring 77 x 2 NBR 1
71309 Wave spring washer (34 x 26 x 0.4) 3
71310 6304zz (20 x 52 x 15) roller bearing 2
71311 6308zz (40 x 90 x 23) roller bearing 1
71313 M6 Nord-Lock washer 4
71314 M5 x 12 DIN 914 A2 screw 1
71322 M8 x 150 DIN 912 A2 screw 6
ASSEMBLIES
27-051 Additional ventilation 24 V dc IP56 DOSTEC AC3 1
29-035 Control PCB with cover DOSTEC AC 1
29-037 Power PCB with box AC2/3 1
29-057.1 PCB, encoder base and cover DOSTEC AC 1
29-059.1 Encoder with cover AC3 (Dostec-50) 1
71-029 Regulator Dostec-50 pas1 mm complete 1
71-030 Regulator Dostec-50 pas1.5 mm complete 1
71-031 Shaft guide Dostec-50P 1
VALVES
61-010-P/F/I Suction valve 1
- ¼ 1
61-011-P/F/I Discharge valve 1
- ¼ 1
61-875-P/ Suction valve 1
- ¼ PP Borosilicate 1
61-885-P Discharge valve 1
- ¼ PP Borosilicate 1
MAINTENANCE KIT (valves+seals+bellows)
71-071-P Dostec-50 P77 PP maintenance kit 1
71-072-P Dostec-50 P95 PP maintenance kit 1
71-073-P Dostec-50 P110 PP maintenance kit 1
Material code: – P = Polypropylene
– F = PVDF
– I = AISI 316
– C = Ceramic
Maintenance