ITech CalPower IT6302

System Commands
Copyright© Itech Electronics Co., Ltd. 14
is returned, the register is reset.
Query syntax
STATus:QUEStionable:INSTrument:ISUMmary3[:EVENt]?
Arguments
None
STATus:QUEStionable:INSTrument:ISUMmary3:ENABl
e
This command can re-write the parameter of query enable register in channel
3.
Command syntax
STATus:QUEStionable:INSTrument:ISUMmary3:ENABle
Arguments
Register parameter
Query syntax
STATus:QUEStionable:INSTument:ISUMmary3:ENABle?
STATus:QUEStionable:INSTrument:ISUMmary3:COND
ition?
This command can query the parameter of query status register in channel 3.
Query syntax
STATus:QUEStionable:INSTrument:ISUMmary3:CONDition?
Arguments
None
STATus:OPERation[:EVENt]?
This command can read the parameter from operation event register.
After executing this order, operation event register is reset.
Query syntax
STATus: OPERation [:EVENt]?
Arguments
None
Returns
<NR1>