Need help?Do you have a question about the ITech IT-M3400 Series and is the answer not in the manual?
General| Model | IT-M3400 Series |
|---|---|
| Category | Power Supply |
| Voltage Resolution | 1 mV |
| Current Resolution | 1 mA |
| Storage Temperature | -20°C to 70°C |
| Current Accuracy | 0.1%+5mA |
| Interface | USB, RS232 |
| Protection Features | OVP, OCP, OTP |
| Operating Temperature | 0 to 40 °C |
| Weight | 5.5 kg |
| Cooling Method | Fan cooled |
Explains CAUTION, WARNING, and NOTE symbols used in the manual.
Covers product warranty terms and conditions, including disclaimers.
Details the components and functions of the instrument's front panel.
Explains the layout and functions of the instrument's keypad.
Describes the connectors and ports located on the instrument's rear panel.
Lists available instrument models and optional accessories.
Instructions for checking package contents and identifying missing or damaged items.
Precautions and steps for safely connecting the instrument to AC power.
Describes methods for connecting the instrument to the device under test.
Details installing and connecting various communication interfaces (USB, LAN, GPIB, etc.).
Provides instructions for the initial power-on and self-test procedure.
Guide to programming voltage, current, and power values for the output.
Explains how to control the instrument's output state using the front panel.
Configures the instrument for Constant Voltage (CV) or Constant Current (CC) priority modes.
Instructions on how to set the desired output voltage level.
Instructions on how to set the desired output current value.
Details on creating and managing test sequences with multiple steps.
Explains how to set up and execute battery charge/discharge test files.
Guide to emulating battery behavior for various test scenarios.
Configures the over-voltage protection limit and delay time.
Configures the over-current protection limit and delay time.
Configures the under-voltage protection limit and delay time.
Sets the over-temperature protection limit for the Unit Under Test.
Instructions for saving and recalling instrument settings and parameters.
Configures communication interfaces like GPIB, USB, LAN, RS-232, RS-485, and CAN.
Details on connecting and measuring the temperature of the device under test.
Describes the optional module for DC reverse connection and surge protection.
Explains how to operate multiple instruments in a multi-channel system.
Details on synchronizing instrument operations for timing output control.
Steps for configuring a master and slave unit for parallel operation.
Procedures for performing self-tests to verify instrument functionality.
Guidelines for safely cleaning and maintaining the instrument.
Instructions for returning the instrument for service or repair.
Technical specifications for the IT-M3412 model.
Technical specifications for the IT-M3422 model.
Technical specifications for the IT-M3432 model.
Technical specifications for the IT-M3414 model.
Technical specifications for the IT-M3425 model.
Technical specifications for the IT-M3435 model.
Lists specifications for optional red and black test cables.
To Next Page
