Need help?Do you have a question about the ITech IT-M3900C Series and is the answer not in the manual?
General| Model | IT-M3900C Series |
|---|---|
| Category | Power Supply |
| Voltage Resolution | 1 mV |
| Cooling Method | Forced air cooling |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Output Current | 0 to 10 A |
| Current Resolution | 0.1 mA |
| Current Accuracy | 0.1% + 5 mA |
| Programming Speed | ≤10ms |
| Interface | LAN, USB, RS232 |
| Communication Interface | SCPI |
| Protection | OVP, OCP, OTP |
Details on product warranty, disclaimers, and registered trademarks.
Information on hardware/software licensing and U.S. government rights.
Explanation of safety icons (CAUTION, WARNING, NOTE) and their meanings.
Details ITECH's product warranty period and conditions for service or repair.
Conditions that render the product warranty invalid.
Illustrations and descriptions of safety symbols used in the manual.
General safety guidelines to be observed during operation of the instrument.
Specifies operating temperature, humidity, and other environmental requirements.
Explanation of compliance tags like CE, UKCA, and WEEE.
Details on compliance with EMC and Low-Voltage directives and relevant standards.
Overview of the IT-M3900C series features and applications.
Description of the front panel components and their functions for 1U and 2U models.
Explanation of the front panel keys and their functions for 1U and 2U models.
Details on how to use the push-on knob for setting values and navigating menus.
Identification of connectors and interfaces on the rear panel of the instrument.
Explanation of the indicator lamps on the VFD display and their meanings.
Overview of the configuration menu and how to set parameters like CC/CV priority.
Guide to system settings such as beeper, power-on state, and communication.
Information on optional accessories like interface cards for communication.
Steps to unpack and check the instrument and its package contents upon delivery.
Details on the physical dimensions and installation space requirements.
Instructions and precautions for connecting the power cord and AC input.
Guidance on connecting test cables to the instrument and DUT, including safety.
Setup for communicating with the instrument via USB, LAN, CAN, GPIB, or RS-232.
Procedure for setting the output voltage value of the power supply.
Procedure for setting the output current value of the power supply.
Procedure for setting the output power value and direction of the power supply.
Detailed settings within the configuration menu for power supply operation.
Overview of protection functions like OVP, OCP, OPP, UCP, UVP, OTP.
List of advanced functions including LIST, BATTERY, Waveforms, SAS, and Emulator.
How to switch between local panel control and remote PC control modes.
How to prevent accidental key presses by locking the front panel.
Procedures for saving and recalling instrument settings and parameters.
Instructions for configuring and starting data recording of voltage and current.
How to enable or disable the instrument's beeper for various events.
Configuration of the instrument's state and output upon power-on.
How to switch between local measurement and remote sensing for accurate measurements.
Setting trigger sources for List and data logging functions (Immediate, Manual, Bus, Voltage, Current, External).
Configuration of communication settings for USB, LAN, CAN, GPIB, RS-232 interfaces.
Instructions for configuring single unit or parallel operation modes (Master/Slave).
Details on using digital I/O pins for logic control and signal input/output.
Using external analog signals for remote setting of instrument parameters via IT-E177 card.
How to view instrument details like model, SN, firmware versions, and parameters.
Procedure to reset the instrument to its factory default settings.
Instructions for upgrading the instrument's system version via USB or Web.
Overview of the main technical specifications for the instrument series.
Detailed technical specifications for the IT-M3901C-10-170 model.
Detailed technical specifications for the IT-M3903C-10-340 model.
Detailed technical specifications for the IT-M3905C-10-510 model.
Detailed technical specifications for the IT-M3910C-10-1020 model.
Detailed technical specifications for the IT-M3906C-80-120 model.
Detailed technical specifications for the IT-M3912C-80-240 model.
Detailed technical specifications for the IT-M3906C-300-60 model.
Additional characteristics like state storage capacity and calibration frequency.
Procedures for performing self-tests to check instrument functionality.
Guidelines for cleaning the instrument to ensure safety and performance.
Steps for preparing and contacting support in case of instrument failure.
Basic checks to perform to identify if a failure is due to the instrument or external connections.
How to find and record the instrument's serial number (SN) for service.
Information on ITECH's repair and replacement services during and after warranty.
Catalog of optional test cables with specifications and current ratings.
Glossary of terms or abbreviations related to potential instrument faults.
Instructions and procedures for replacing fuses in different instrument models.
To Next Page
