Inspection and Installation
Item
Qty.
Model Remarks
Ex-factory Test
Report
x1 - It contains the test report
and calibration report of
the instrument before
delivery.
Communication card
(optional)
X IT-E176/IT-
E177
IT-E176 (GPIB communi-
cation card) and IT-E177
(Analog/RS232 communi-
cation card) are non-
standard accessories.
The actual delivery quan-
tity is subject to the user's
order.
Upon verification of the shipment, keep the package and relevant contents
thereof in a safe place. When returning the instrument for warranty service or
repair, the specified packing requirements shall be met.
2.2 Instrument Size Introduction
The instrument should be installed at well-ventilated and rational-sized space.
Please select appropriate space for installation based on the instrument size.
The detailed dimension drawings of this series instrument are as follows (unit:
mm, deviation: ±1 mm):
Copyright © Itech Electronic Co., Ltd.
20
To Next Page
Loading...
