ITech CalPower IT6302

Current Setting Commands
Copyright© Itech Electronics Co., Ltd. 23
Related Command
[SOURce:]CURRent[:LEVel][:IMMediate]:STEP[:INCRement]
SOURce:]CURRent[:LEVel]:DOWN[:IMMediate][:AMPLi
tude]
This command is used to decrease a current step for current channel.
Command syntax
[SOURce:]CURRent[:LEVel]:DOWN[:IMMediate][:AMPLitude]
Arguments
None
Related Command
[SOURce:]CURRent[:LEVel][:IMMediate]:STEP[:INCRement]
[SOURce:]CURRent[:LEVel][:IMMediate]:STEP[:INCRe
ment]
This command is used to set the current step.
Command syntax
[SOURce:]CURRent[:LEVel][:IMMediate]:STEP[:INCRement]
Arguments
Current value
Unit
A|mA|uA
Query syntax
[SOURce:]CURRent[:LEVel][:IMMediate]:STEP[:INCRement]?
[SOURce:]CURRent[:LEVel]:TRIGgered[:IMMediate][:I
NCRement]
This command is used to set the trigger current.
Command syntax
[SOURce:]CURRent[:LEVel]:TRIGgered[:IMMediate][:INCRement]
Arguments
Current value|Min|Max|Def|Up|Down
Unit
A|mA|uA