ITech CalPower IT6302

Channel Operation Commands
Copyright© Itech Electronics Co., Ltd. 32
Command syntax
INSTrument:COMbine:SERies
Arguments
None
Query syntax
INSTrument:COMbine?
INSTrument:COMbine:PARAllel
Set channel 1 and channel 2 of the power supply to parallel state.
Command syntax
INSTrument:COMbine:PARAllel
Arguments
None
Query syntax
INSTrument:COMbine?
INSTrument:COMbine:OFF
Disable serial/parallel state of channel 1 and channel 2.
Command syntax
INSTrument:COMbine:OFF
Arguments
None
Query syntax
INSTrument:COMbine?