ITech IT6512C - Carwave:lv124:E08[:Ubmin]:Time; Carwave:lv124:E09[:State]

Car Wave Command（IT6500C）
Copyright© Itech Electronics Co., Ltd. 91
Query syntax
CARWave:LV124:E08:UBMIN?
Returns
NR3
CARWave:LV124:E08[:UBMIN]:TIMe
This command is used to set keeping voltage duration of LV124 E08.
Command syntax
CARWave:LV124:E08:TIM < value >
Arguments
MINimum|MAXimum|NR3
Reset Value
0.0
Example
CARWave:LV124:E08:TIM 1
Query syntax
CARWave:LV124:E08:TIM?
Returns
NR3
CARWave:LV124:E09[:STATe]
This command is used to simulation LV124 E09.
Command syntax
CARWave:LV124:E09 <bool>
Arguments
ON|OFF|1|0
Reset Value
0
Example
CARWave:LV124:E09 1
Query syntax
CARWave:LV124:E09?