ITech IT6512C - [Source:]Voltage:maximum[:Level]

Output Commands
Copyright© Itech Electronics Co., Ltd. 34
Command syntax
[SOURce:]VOLTage:MINimum[:LEVel] <MINimum|MAXimum|NRf>
Arguments
MINimum|MAXimum|NRf
Unit
V
Reset Value
MINimum
Example
VOLT:MIN 2.0
Query syntax
[SOURce:]VOLTage:MINimum[:LEVel]? [MINimum|MAXimum]
Returns
NRf
[SOURce:]VOLTage:MAXimum[:LEVel]
This command is used to set maximum value of voltage.
Command syntax
[SOURce:]VOLTage:MAXimum[:LEVel] <MINimum|MAXimum|NRf>
Arguments
MINimum|MAXimum|NRf
Unit
V
Reset Value
MAXimum
Example
VOLT:MAX 24.0
Query syntax
[SOURce:]VOLTage:MAXimum[:LEVel]? [MINimum|MAXimum]
Returns
NRf