ITech IT6512C - List:edit; List:repeat; List:sequence:count

List Operation Commands
Copyright© Itech Electronics Co., Ltd. 62
LIST:EDIT
This command is used to select list file which has been edited.
Command syntax
LIST:EDIT <MINimum|MAXimum|1~10>
Arguments
MINimum|MAXimum|<1~10>
Example
LIST:EDIT 10
Query syntax
LIST:EDIT?
Returns
NR1
LIST:REPeat
This command is used to edit the running times of list file.
Command syntax
LIST:REPeat <MINimum|MAXimum|1~65535>
Arguments
MINimum|MAXimum|<1 to 65535>
Example
LIST:REP 2000
Query syntax
LIST:REPeat? [MINimum|MAXimum]
Returns
NR1
LIST:SEQuence:COUNt
This command is used to edit the wave count of list file.
Command syntax
LIST:SEQuence:COUNt <1-10>
Arguments
<1~10>