To Next Page

To Previous Page

SCPI Command Description

SYSTem:BEEPer:IMMediate

This command is used to test the beeper. After executing this command, the

instrument will beeper immediately.

Command syntax

SYSTem:BEEPer:IMMediate

Arguments

None

Example

SYST:BEEP:IMM

Query syntax

None

SYSTem:BEEPer[:STATe]

This command is used to turn on/turn off the beeper, when the arguments is set

to 1/ON, the beeper is enabled and press keyboard will beeper, otherwise, it is

mute.

Command syntax

SYSTem:BEEPer <bool>

Arguments

OFF|ON|0|1

Example

SYSTem:BEEP 1

Query syntax

SYSTem:BEEPer[:STATe]?

Returns

0|1

SYSTem:VERSion?

This command is used to query the current SCPI version. The returned

parameter is a string like “YYYY.V “, in which the YYYY is the year of that

version, V is the software version of that year.

Command syntax

SYST:VERS?

Arguments

None

ITech IT6512C Manual

Other manuals for ITech IT6512C