ITech IT6512C - List:sequence:select; List:sequence:repeat

List Operation Commands
Copyright© Itech Electronics Co., Ltd. 63
Example
LIST:SEQ:COUN 1
Query syntax
LIST:SEQuence:COUNt?
Returns
<NR1>
LIST:SEQuence:SELect
This command is used to edit the selected wave sequence in LIST file. For
each List, you can select 1-10 wave files from 100 wave files and combine them
to a List file in sequence.
Command syntax
LIST:SEQuence:SELect<1~10>.<1~100>
Arguments
<1-10>,<1-100>
Example
LIST:SEQ:SEL 1,20
Query syntax
LIST:SEQuence:SELect? <NR1>
Returns
NR1
LIST:SEQuence:REPeat
This command is used to edit the running count of sequence which is
linked to the List file.
Command syntax
LIST:SEQuence:REPeat <1~10>,<MINimum|MAXimum|<NR1>
Arguments
<1~10>,MINimum|MAXimum|<1~65535>
Query syntax
LIST:SEQuence:REPeat? [MINimum|MAXimum]
Returns
NR1