ITech IT6512C - [Source:]Current:maximum[:Level]; [Source:]Current:rise[:Level]

Output Commands
Copyright© Itech Electronics Co., Ltd. 30
Query syntax
[SOURce:]CURRent:MINimum[:LEVel]? [MINimum|MAXimum]
Returns
NRf
Related Command
CURR:MAX,CURR
[SOURce:]CURRent:MAXimum[:LEVel]
This command is used to set the maximum value of current.
Command syntax
[SOURce:]CURRent:MAXimum[:LEVel] <MINimum|MAXimum|NRf>
Arguments
MINimum|MAXimum|NRf
Unit
A
Reset Value
MAXimum
Example
CURR:MAX 120.0
Query syntax
[SOURce:]CURRent:MAXimum[:LEVel]? [MINimum|MAXimum]
Returns
NRf
Related Command
CURR:MIN ,CURR
[SOURce:]CURRent:RISE[:LEVel]
This command is used to set rising time of current.
Command syntax
[SOURce:]CURRent:RISE[:LEVel] <MINimum|MAXimum|NRf>
Arguments
MINimum|MAXimum|NRf