ITech IT6512C - Chapter11 Wave Operation Command; Sequence:edit; Sequence:recall; Sequence:step:count

Wave Operation Command
Copyright© Itech Electronics Co., Ltd. 65
Chapter11 Wave Operation Command
SEQuence:EDIT
This command is used to select the wave file to be edited.
Command syntax
SEQuence:EDIT <MINimum|MAXimum|1~100>
Arguments
MINimum|MAXimum|<1~100>
Example
SEQ:EDIT 3
Query syntax
SEQuence:EDIT? [MINimum|MAXimum]
Returns
NR1
SEQuence:RECall
This command is used to recall a wave file.
Command syntax
SEQuence:RECall <NR1>
Arguments
MINimum|MAXimum|<1-100>
Example
SEQ:REC 1
Query syntax
SEQ:REC?
Returns
NR1
SEQuence:STEP:COUNt
This command is used to edit the step count of wave file.
Command syntax
SEQuence:STEP:COUNt <1~10>