ITech IT6512C - Status:questionable:ptransition; Status:questionable:ntransition

SCPI Command Description
Copyright© Itech Electronics Co., Ltd. 13
Default set
Refer to *PSC command
Example
STATus:QUEStionable:ENABle 16
Query syntax
STATus:QUEStionable:ENABle?
Returns
<NR1>
Related Command
*PSC
STATus:QUEStionable:PTRansition
This command is used to edit the positive transition trigger register of
query event.
Command syntax
STATus:QUEStionable:PTRansition <NR1>
Arguments
0~65535
Example
STAT:QUES:PTR 2000
Query syntax
STATus:QUEStionable:PTRansition?
Returns:
NR1
STATus:QUEStionable:NTRansition
This command is used to edit the negative transition trigger register of
query event.
Command syntax
STATus:QUEStionable:NTRansition <NR1>
Arguments
0~65535
Example
STAT:QUES:NTR 1000