ITech IT6522D - Quality Certification and Assurance; Safety Symbols; Limitation of Warranty

IT6500D User Manual
Copyright ©ITECH Electronics Co., Ltd. i
Quality Certification and Assurance
We certify that IT6500D series power supply meets all the published
specifications at time of shipment from the factory.
Warranty
ITECH warrants that the product will be free from defects in material and
workmanship under normal use for a period of one (1) year from the date of
delivery (except those described in the Limitation of Warranty below).
For warranty service or repair, the product must be returned to a service center
designated by ITECH.
 The product returned to ITECH for warranty service must be shipped
PREPAID. And ITECH will pay for return of the product to customer.
 If the product is returned to ITECH for warranty service from overseas, all
the freights, duties and other taxes shall be on the account of customer.
Limitation of Warranty
This Warranty will be rendered invalid if the product is:
 Damaged resulting from customer-wired circuits or customer-supplied parts
or accessories;
 Modified or repaired by customer without authorization;
 Damaged resulting from customer-wired circuits or use in an environment
not designated by us;
 The product model or serial number is altered, deleted, removed or made
illegible by customer;
 Damaged as a result of accidents, including but not limited to lightning,
moisture, fire, improper use or negligence.
Safety Symbols
Direct current
ON ( power)
Alternating current
OFF ( power)
Both direct and alternating
current
Power-on state
Chassis ( earth ground) symbol.
Power-off state
Earth ( ground) terminal
Reference
terminal
Caution
Positive terminal
Warning ( refer to this manual for
specific Warning or Caution
information)
Negative terminal
A chassis terminal
-
-