ITech IT6522D - Source Voltage Level; Source Voltage Limits

Function and Features
Copyright ©ITECH Electronics Co., Ltd. 37
function, the output control should be under the external analog control mode.
The output current monitoring range ( which reflects the power supply output
current from zero to full scale) can be selected from 0-10V or 0-5V. To switch on
the monitoring range setting, open the MENU ( Menu) → CONFIG ( Configure)
→Monitor ( External monitor mode).
Press the Right Key to select the output current monitoring range ( 0~10V or
0~5V).
The connection setting of digital voltmeter is shown below.