Instrument Introduction
Copyright ©ITECH Electronic Co., Ltd. 12
Chapter2 Instrument Introduction
2.1 Verifying the Shipment
Open the package and check the articles within package box before operation.
In case of any non-conformity, missing or appearance wearing, please contact
ITECH immediately.
The package box should comprise:
Programmable
AC Power
Supply
For the specific models included in this
series, refer to
Number of the power cords vary
depending on the model, See the
Section 2.3 Connectiong the Power
Cord
for power cord connection.
Test report before delivery
NOTE
After confirming that package contents are consistent and correct, please appropriately
keep package box and related contents. The package requirements should be met when
the instrument is returned to factory for repair.
2.2 Front Panel
The front panel of IT7900 is as shown below.
2 USB interface /Print/Trig/Menu
6 Up, down, left and right key and enter key
To Next Page
Loading...
Need help?
General
