ITech IT8514C+

Peak Testing Commands
Copyright © ITECH Electronic Co., Ltd. 55
Examples
PEAK:VOLT:MIN?
Returned Parameters
<NR2>
PEAK:CURRent:MAXimum?
This command is used to query the maximum current.
Command Syntax
PEAK:CURRent:MAXimum?
Examples
PEAK: CURR:MAX?
Returned Parameters
<NR2>
PEAK: CURRent:MINimum?
This command is used to query the minimum current.
Command Syntax
PEAK: CURRent:MINimum?
Examples
PEAK:CURR:MIN?
Returned Parameters
<NR2>