ITech IT8600 Series

System Commands
Copyright © Itech Electronic Co., Ltd. 45
SYSTem:COMMunicate:LAN:SOCKetport
This command is used to set the network communication port.
Command syntax:
SYSTem:COMMunicate:LAN:SOCKetport
Parameter:
<NR1>
Unit:
None
Reset value:
30000
Query Syntax:
SYSTem:COMMunicate:LAN:SOCKetport?
Returned value:
<NR1>
SYSTem:COMMunicate:LAN:MACaddress?
This command is used to return the communication MAC address.
Command syntax:
SYSTem:COMMunicate:LAN:MACaddress?
Parameter:
<STR>
Unit:
None
Query Syntax:
SYSTem:COMMunicate:LAN:MACaddress?
Returned value:
<STR>