5.4. Operational status
The current stored water temperature is displayed by default.
The current operating status is displayed using the following icons.
The LED indicator is continuously lit blue.
Icons
SMART control ON
The heater adjusts the stored water temperature
independently to meet the user's demands.
Boost
The stored water is heated once to 85°C.
Error
The heater has encountered an error.
SMART control OFF
The stored water is heated according to the
CONFIGURATION settings.
Day mode
Day mode is activated and the stored water may NOT
be heated during this period.
Night mode
Night mode is activated and the stored water CAN be
heated during this period.
Heating active
The heating element is activated and the stored water
is heated.
Frost protection active
The frost protection is activated.
Communication
Registering a wireless connection.
LED ... blue/yellow/green/red
Continuous on... —
Flashing on and off... 1x short On-Off every 5 seconds.
Flashes slowly... 1 second On, 1second Off.
Flashes rapidly... 1⁄2 second On, 1⁄2 second Off.
5.5. Frost protection
The heater is equipped with an automatic FROST PROTECTION
function to ensure the stored water does not freeze.
If the water temperature drops below 5°C, it heats the stored water
to 8°C.
ä Caution!
The FROST PROTECTION function is only enabled in STANDBY
mode.
22
To Next Page
Loading...
