Itho Daalderop Smartboiler - M4. Boost; M5. Error Reset

5.14. M4. BOOST
3 sec
BOOST
M4. BOOST
Example BOOST:
850
c
The LED indicator is continuously lit blue.
Sometimes there might not be enough hot water. Activate the
BOOST function for immediate one-time heating of the water up to
85°C.
After the stored water is heated, the function is automatically
disabled.
ä Caution!
The BOOST function only works in ON mode and with the SMART
CONTROL or NIGHT functions activated.
Tip
The BOOST function can also be activated via the
CONFIGURATION setting.
Immediate activation of function
●
In the operating status, press the △ button for approximately 3
seconds.
● The LED indicator flashes white twice in confirmation.
5.15. M5. ERROR RESET
5 sec
ERROR RESET
M5. ERROR RESET
ERROR RESET example:
0
ERROR
The LED indicator is continuously lit blue.
Activating the ERROR RESET function clears the history of the fault
messages.
After the history is cleared, the function is automatically disabled
and the water heater restarts in STANDBY mode.
The heater mode must be changed to ON via the BOIL setting.
Tip
The ERROR RESET function can also be enabled via the SERVICE
setting.
Immediate activation of function
●
In operating status, press the ↺ button for approximately 5
seconds.
● The LED indicator flashes green twice in confirmation.
32