ITV Greenline HE E6-E11 - Page 75

Factory settings
6 720 802 419 (2012/06) en
75
Additional heat F value Access level
Additional heat general Start delay 60 min 1
Additional heat only
No 1
Block additional heat
No 1
Maximum outdoor temperature for additional heat
10 °C 1
Electric additional heat Electric heater connection Output per heater
Output limitation in compressor mode
Output limitation when additional heat only
Output limitation in hot water mode
9kW
6kW
6kW
6kW
1
1
1
1
Regulator settings P constant
I constant
D constant
Minimum PID signal
Maximum PID signal
4,0
300,0
0,0
0%
100%
1
1
1
1
1
Hot water electric heater Acknowledge hot water additional heat 1
Additional heat program Active program No 1
View/edit active program
1
Outdoor temperature limit for deactivation of time control
-26,0 °C 1
Table 173 Factory settings Additional heat
Safety functions F value Access level
Setting collector circuit in T10 Lowest permitted temperature E21.T10 -6,0 °C
4,0 °C Groundwater
1
Lowest permitted temperature E22.T10 -6,0 °C
4,0 °C Groundwater
1
Hysteresis alarm reset
1.0K 1
Number of warnings before alarm
11
Setting collector circuit out T11 Lowest permitted temperature E21.T11 -8,0 °C
2,0 °C Groundwater
1
Lowest permitted temperature E22.T11 -8,0 °C
2,0 °C Groundwater
1
Hysteresis alarm reset 1.0K 1
Number of warnings before alarm
11
Table 174 Factory settings Safety functions
General F value Access level
Room sensor settings Show outdoor temperature in room sensor No 0
Set date 0
Set time 0
Summer/winter time Automatic 0
Display contrast 70% 0
Language 0
Country (Start-up) 1
Table 175 Factory value General
Alarms F value Access level
Alarm indication Alarm buzzer signal Interval
Blocking time
2s
Off
0
0
Alarm indication control unit
Block alarm buzzer No 0
Alarm indication room sensor
Block alarm indicator lamp No 0
General alarm level Alarms and warnings No 1
Table 176 Factory settings Alarm