PRINT/HI key
＊
Short press sends data a RS232 port; long press lower limit initials lower limit setting
＊
Shift key (shift rightwards)
G/N key
＊
Displays gross and net weight by turns
＊
Stores current condition
MR key
＊
Memory recall
＊
Switches on /off check weighing function
＊
Long press enters max. Capacity setting mode
MODE key Long press to initials function setting
TARE key
＊
Tares the weight of the container
＊
Accepts the keypad tare entrie
M+ key
＊
Adds the indicated weight into Accumulation memory
＊
During editing selects the next higher option or increases setting values.
M- key
＊
Deletes accumulation records
＊
During editing, selects the next lower option or decreases setting values.
ZERO/ESC key
＊
Zeros the display (within 2% of max.capacity)
＊
Exits from setting mode.
Power Supply
Please verify the local AC power source and switch the two-stage switch (110V/220V) to the
proper place before plugging into the power outlet.
Alternative Power Supply
1) AC 110V/220V (AC±10%)
2) (6V/4A) Internal Rechargeable Battery
Power Consumption
About 300mW, 80hrs (without backlight)
About 380 mW, 65hrs (with backlight)
To Next Page
Loading...
Need help?
General
