Jadever 1.5K User Manual

500
、
1000( pieces) .
4)
Put the corresponding samples on the weighing pan, and then press
is displayed momentarily before the display reverts to the sample size.
→
5
）
Remove the samples and put the load on, the scale begins to count.
Note:
1.
The larger the sample size, the more accurate unit
2.
Symbol “ ” points at “UW” when calculated unit weight is lower than 4/5 of scale
Accumulation, Accumulation Display and Accumulation
1)
Under the weighing mode, put the item on the weighing pan. Press key
appearance of “ ”.
”
weight of the items.
2)
Remove the item and the display goes back to zero before the next accumulation
register .
（
The maximum is 20
Accumulation Display
Press key
MR
to display total accumulation data and each accumulation event in detail.
The number of weighm
ents is indicated by Auxiliary display at the Lower Left
Accumulation Clearing
To clear accumulation data, press key
return to normal weighing mode press key
Unit setting menu
1) How to enter Unit setting
menu?
Method 1: Press and hold key
UNIT/LO
Method 2: Long press key
MODE
“ ”
is displayed momentarily before the display reverts to setting item
Vetek
Put the corresponding samples on the weighing pan, and then press
key
G/N
is displayed momentarily before the display reverts to the sample size.
Remove the samples and put the load on, the scale begins to count.
The larger the sample size, the more accurate unit
weight.
Symbol “ ” points at “UW” when calculated unit weight is lower than 4/5 of scale
Accumulation, Accumulation Display and Accumulation
Clearing
Under the weighing mode, put the item on the weighing pan. Press key
”
is displayed momentarily before the display reverts
→
Remove the item and the display goes back to zero before the next accumulation
The maximum is 20
pieces.)
to display total accumulation data and each accumulation event in detail.
ents is indicated by Auxiliary display at the Lower Left
To clear accumulation data, press key
M-
while the total weight is displayed. To exit and
return to normal weighing mode press key
ZERO/ESC
.
menu?
UNIT/LO
while powering on the scale.
MODE
for 3 seconds under normal weighing mode.
is displayed momentarily before the display reverts to setting item
p00.
Vetek
Weighing AB
G/N
.
“ ”
Symbol “ ” points at “UW” when calculated unit weight is lower than 4/5 of scale
division.
Under the weighing mode, put the item on the weighing pan. Press key
M+
at the
is displayed momentarily before the display reverts
to the
Remove the item and the display goes back to zero before the next accumulation
can
to display total accumulation data and each accumulation event in detail.
ents is indicated by Auxiliary display at the Lower Left
corner.
while the total weight is displayed. To exit and
for 3 seconds under normal weighing mode.
p00.

Jadever 1.5K Specifications

General

Brand	Jadever
Model	1.5K
Category	Scales
Language	English