Vetek Weighing AB
Low Battery Warning
When appears in the upper left corner of the weight window, the battery requires
recharging. The charge lamp turns green from red when the recharging is completed (which
takes about 8 hours).Disconnect the scale from power supply when it is fully charged.
Weighing
Begin with no load on the scale, the display reading zero. Place item(s) to be weighed on the
scale. The display shown is 1000.0g, gross weight.
（
The desired weighing unit should be
selected before weighing, refer to section 5-5.
）
→
Manual Tare & Preset Tare
When weighing a sample that must be held in a container, tare stores the container weight
into memory.
Manual Tare
1)
Under the weighing mode, place the container on the weighing pan, wait till stable
symbol appears, and press the key
TARE
. The container is tared.
→
2)
Place the item(s) to be weighed into the container. The weight displayed is the net weight.
3)
Remove all items from the weighing pan; the screen displays the tare value.
4)
To clear tare with an empty pan, Press down key
TARE
or key
ZERO/ESC
.
Preset Tare
1)
Long press key
TARE
for 3 seconds. The scale is now in Digital inputting mode with the
left-most digit
2)
Press key
UNIT/LO
to shift leftwards, key
PRINT/HI
to shift rightwards, key
M+
to
increase setting values and key
M-
to decrease setting value. E.g. here we set the Preset
Tare value as
To Next Page
Loading...
Need help?
General
