Jadever 1.5K User Manual

3) Press key
G/N
to save and
return
reverting to preset tare
2) Put the load on the container, the scale will automatically deduct the value of the container
from the total value.
NOTE: Press Key
G/N
to display gross and net weight by turns.
Checkweighing
Use this mode to compare the weight of an item to Lower, and Upper limits. When the
checkweigh mode is enabled, the “ ” indicator will turn on.
Lower limit setting
1)
Began by pressing down key
inputting mode with the left-
most
2) Press key
M+
to increase setting values, key
UNIT/LO
to shift leftwards and key
3) To
save the Lower limit and return to weighing mode, Press key
Upper limit setting
1) Began by Pressing down key
PRINT/HI
inputting mode with the left-
most digit
2) Press key
M+
to increase setting values, key
UNIT/LO
to shift leftwards and key
3)
To save th
e upper limit and return to weighing mode, Press key
Place the sample on the weighing pan, if the sample weight is under the lower weight
range, the LOW lamp will light up. If the sample is wit
range the OK lamp will light up. If the sample is over the upper weight range, the HI
lamp will light up.
Simple Counting
1) Press key
UNIT/LO
to select the unit
2) Press key
G/N
, the ex-
factory default sample size (10 pcs) is
3) Press key
M+
to choose the
sampling
Vetek
return
to weighing mode, the screen
display
→
2) Put the load on the container, the scale will automatically deduct the value of the container
to display gross and net weight by turns.
Use this mode to compare the weight of an item to Lower, and Upper limits. When the
checkweigh mode is enabled, the “ ” indicator will turn on.
Began by pressing down key
UNIT/LO
for 3 seconds. The scale is now in
most
digit
to increase setting values, key
M-
to decrease setting value,
to shift leftwards and key
PRINT/HI
to shift
save the Lower limit and return to weighing mode, Press key
G/N
.
PRINT/HI
for 3 seconds. The scale is now in Digital
most digit
blinking.
to increase setting values, key
M-
to decrease setting value,
to shift leftwards and key
PRINT/HI
to shift
e upper limit and return to weighing mode, Press key
G/N
.
Place the sample on the weighing pan, if the sample weight is under the lower weight
range, the LOW lamp will light up. If the sample is wit
hin the lower and upper weight
range the OK lamp will light up. If the sample is over the upper weight range, the HI
to select the unit
“PCS”.
factory default sample size (10 pcs) is
displayed.
sampling
amount .Available options are10
、
20
、
Vetek
Weighing AB
display
“ " before
2) Put the load on the container, the scale will automatically deduct the value of the container
Use this mode to compare the weight of an item to Lower, and Upper limits. When the
for 3 seconds. The scale is now in
Digital
to decrease setting value,
key
for 3 seconds. The scale is now in Digital
to decrease setting value,
key
Place the sample on the weighing pan, if the sample weight is under the lower weight
hin the lower and upper weight
range the OK lamp will light up. If the sample is over the upper weight range, the HI
、
50
、
100
、
200
、

Jadever 1.5K Specifications

General

Brand	Jadever
Model	1.5K
Category	Scales
Language	English