Jadever JDI-800 User Manual

JADEVER ▍
11
2. Enter the Accuracy and Max CAP needed, for example:
3. Press OK to save the setting and enter calibration screen, and pls press
Return, if you don’t need to calibrate scale.
▍Calibration I:
Press SETUP→ CAL you will enter the calibration screen. Or you could
calibrate scale once finishing the Accuracy and Max CAP setting. There are
two Calibration method as following:
Note: You could set different units for Scale1 and Scale2.

Jadever JDI-800 Specifications

General

Brand	Jadever
Model	JDI-800
Category	Accessories
Language	English