Jadever JDI-800 User Manual

JADEVER ▍
12
▍Calibration method 1：
1. Clean the Weighing pan and press rbitrary value, the following screen will
show:
2. The screen will enter the first point calibration setting screen after finishing the
zero-point calibration. Please enter the calibration value by numeric key, and
press OK, for example：enter 1kg（the unit should corresponds the unit set
before）, then press OK.
↓
3. Please put 1kg weight on the weighing pan:

Jadever JDI-800 Specifications

General

Brand	Jadever
Model	JDI-800
Category	Accessories
Language	English