JWI-700C 8
5-3 Function Setting
1) Turn on the power while pressing key ZERO.
Note: The following Steps (2) ~ (11) do
not require to operate in order.
2) Press numeric key 0 to shift backlight modes.
Options are On, OFF and OnOFF.
=Auto-on with items greater than 9d placed
on the pan.
= No backlight
= Backlight
3) Press numeric key 2 to set the level in which
the stable indication turns on (filtering) .The lower
the setting, the faster stabilization time.
Options are 1 and 2(level).
4）Press numeric key3 to set the period of inactivity
before the scale automatically turns off. Options
are OFF(Non power-off) 、 5、10、30 and
60 (minutes).
5) Press numeric key 4 to set the range in which the
Zero indication turns on .Options are d0, d1, d2, d3, d4
and d5. (d= scale division)
6）Press numeric key 5 to select serial transmission
rates. Options are 9600, 4800 and 2400 .
7) Press numeric key 7 to set buzz sounds. Options
are Un，In，no，Lo and nbEEP.
=There will be a warning sound when the quantity of the articles exceeds the upper limit.
=There will be a warning sound when the quantity of the articles is between the upper and
lower l limit (including the upper and lower limits).
= There will be a warning sound when the material quantity exceeds the upper and lower
limits, and the weight of the material is more than 20 divisions.
To Next Page
Loading...
Need help?
General
