To Next PageTo Next Page
Need help?Do you have a question about the janitza GridVis Collector and is the answer not in the manual?
General| Brand | janitza |
|---|---|
| Model | GridVis Collector |
| Category | Data Loggers |
| Language | English |
Legal disclaimer regarding the use of informational products and Janitza's liability.
Details copyright information and prohibits unauthorized duplication, processing, or distribution.
Information on keeping documentation up-to-date with device revisions and product changes.
Provides contact information for questions, comments, or suggestions regarding the user manual.
Instructions for returning defective devices, handling batteries, and disposal regulations.
Overview of the GridVis® Collector as a mobile readout device for Janitza measurement devices.
Details features and compatible devices for firmware version 2.0.0.
Step-by-step guide for the initial setup and configuration of the GridVis® Collector.
Illustrates and lists the components included in the GridVis® Collector package.
Specifies the device's operational and storage temperature ranges and charging recommendations.
States compliance with EMC directive and lists applicable standards and directives.
Details technical specifications including memory, display, battery, connectivity, and encryption.
Explains the markings and information found on the device's rating plate.
Explains the meaning and use of warning symbols and notices throughout the documentation and on the device.
Defines hazard levels (DANGER, WARNING, CAUTION, ATTENTION) and their implications for injury or damage.
Emphasizes operating the device in perfect condition and following safety standards.
Highlights hazards from electrical voltage in devices and the importance of proper handling.
Warns about potential hazards from lithium-ion batteries, including contact and temperature issues.
Specifies requirements for personnel performing installation, operation, and maintenance on the device.
Explains how unauthorized manipulation or misuse voids the product warranty.
Details the physical layout of ports, buttons, and status indicators on the GridVis® Collector.
Describes the housing materials, handle, and rubber studs for stability.
Explains the features and benefits of the protective transport case for the GridVis® Collector.
Information on the integrated lithium-ion battery, charging, and LED status indicators.
Details the 100Base-T Ethernet interface and its connection status symbols.
Describes the USB 2.0 port's use for commissioning and connecting converters.
Information on the USB/RS-485 converter, its connection, and technical characteristics.
Instructions for powering the device on, off, and performing a hardware reset.
Explains the two operating modes: Server mode and Device mode, and IP address configuration.
Provides a visual overview of the GridVis® Collector's main menu and sub-menu organization.
Details the elements and icons displayed on the GridVis® Collector's start screen.
Guides on installing necessary GridVis software plug-ins from the USB flash drive.
Step-by-step instructions for configuring the GridVis® Collector within the GridVis software.
Procedure for registering the GridVis® Collector and assigning measurement devices in the GridVis software.
Instructions for transferring the GridVis software project configuration to the GridVis® Collector via USB.
Steps for integrating RS-485 measurement devices using the USB/RS-485 converter.
Details on authentication and encrypted communication using RSA keys for data security.
Configuration steps for the Windows firewall to allow communication with GridVis software.
Guide on how to read out measured values from devices connected to the GridVis® Collector.
Procedure for reading measured values from RS-485 devices connected via USB/RS-485 converter.
Instructions for synchronizing collected data from the GridVis® Collector to the GridVis database.
Steps for integrating plug-ins into the GridVis system service for enhanced functionality.
Details on configuring the automatic start of the Collector Receiver in the GridVis Service edition.
Guide on importing new measurement devices from GridVis software into the GridVis® Collector.
Overview of the 'Settings' menu for configuring LCD brightness, time zone, and language.
Connectivity settings including Ethernet, WLAN, and Server configurations.
Access to system functions like reset, update, and log file management.
Details on the internal clock, synchronization via NTP server, and accuracy.
Information on the battery type, capacity, and typical service life.
Guidelines for device installation, operation, maintenance by qualified personnel, and storage.
Instructions on how to clean the device and accessories correctly to prevent damage.
