Janome 6260QC - Round End;Keyhole Buttonhole; Adjusting the Buttonhole Width

Setscrew (A)
CS ring
CS ring
CS ring
F-board
Replacing Slide Volume and F-Board
Replacing the slide volume control
To remove:
1. Remove the front cover (see page 8).
Unplug the slide volume connector.
2. Remove the 6 CS rings and replace the slide volume.
Replacing the F-board
To remove:
1. Remove the front cover (see page 8).
Unplug the F-board.
2. Remove the 5 CS rings.
3. Remove the 3 setscrews (A) and replace the F-board.
To attach:
4. Follow the above procedure in reverse.
29